Views: 2664

MeteoWind® IoT Pro

Product code : 1676345437

Compact anemometer and wind direction vane sensor with ultra-low power & no dead spot. Meets all World Meteorological Organization (WMO) measurement standards of measurement. No wires to connect or batteries to change, no connectors to break. Featuring SigFox or LoRaWAN wireless Star-on-Star network technology for reliable and redundant data transmission. Elliptical cup design of the proven MeteoWind 2 is used to offer superb measurement qualities in a compact and cost-effective instrument made from anodized aluminum.

Quantity:
More information:
  • Nhà Sản Xuât
  • BARANI DESIGN Technologies

    • Measurement standards
    • Range Resolution Accuracy Sampling rate
    • Wind speed 0-85 m/s
    • gust 0.1 m/s < 2 % of measured value (0.3 - 50 m/s) or
    • ±0.05 m/s (4-16 m/s) with MEASNET cal.
    • 2 pulses per revolution
    • Wind direction 0-360° 1° 2° (no dead-spot) 10 Hz /1 Hz avg. out
    • Linearity R2 > 0.99995
    • Tilt angle sensitivity For horizontal wind speed measurement
    • Starting wind speed <0.2 m/s
    • Default linearity constants (Calibration equation coefficients)
    • Defaults: Slope = 0.6335 Offset = 0.3582 m/s (m/s = 0.6335 * freq(Hz) + 0.3582) internally
    preprogrammed into the wireless module which transmits real wind speed value
    • Distance constant (Delay distance) < 1m (est.) (per ASTM D 5096-96)
    Electrical specifications
    • Output signal & communication LoRaWAN or Sigfox wireless with NB-IoT coming soon
    • Power consumption 350 μA (combined wind speed and wind direction and wireless transmission)
    • Power and battery system Solar charger with a Lithium-Ion battery for 4+ months of operation without sun
    Environmental ratings
    • Operating temperature & humidity -40 °C to + 80 °C, 0 % to 100 % RH
    • Survival wind speed >85 m/s (306 kph, 190 mph) gust
    • IP – Protection rating IP55W (DIN 40050) anemometer, IP67W wireless module with battery
    General specifications
    • Heater (optional) 4 W non-regulated @ 12 Vdc or VAC, (Max continuous 12 W in temperatures < 20 °C)
    • Heater requires an external power supply and regulator.
    • Weight (mass) Anemometer = 210 g, Wireless module with battery= 500 g
    • Dimensions Anemometer rotor diameter = Ø 164 mm, Wind vane radius =111 mm, Total height = 272 mm
    • Patented / Registered OHIM 002153882-0001, 002153882-0002, 002153882-0003
    • Mounting Two M6 screws with nuts (includes a 90° stainless steel mounting arm)

Related Products

Updating
VIDEO
Lingerie Fashion