Three pairs of orthogonally combined geophones with a natural frequency of 12 Hz or 20 Hz are used as sensitive elements. Signal registration is provided by almost any seismograph. Upon request, the tool can be equipped with lower frequency sensors, but this will slightly increase its dimensions.
GStreamer-E can be equipped with a connector for reference land geophone to control source-seismograph synchronization and improve the accuracy of interval velocities calculation.
GStreamer-E with borehole source SHock of horizontally polarized shear wave (SH) is an advanced set of equipment for cross-hole seismic tomography survey in dry and water-filled wells with a distance between them up to 30 m. GeoSV would be enough for cross-hole seismic testing in accordance with ASTM D4428 / D4428M. Borehole sparker Pulse allows to significantly increase distances between the wells. You can read about these techniques here. All borehole sources are operated by pulsed power supply Jack.
Multi-level probe GStreamer-E can be supplied on a reel with a slip ring. The efficiency and safety of work in deep wells are ensured by BGW and BGW light winches.
Delivery set:
- Single level 3C system:
- GStreamer-E tool on cable
- Single channel anchoring system remote control
- Multi-level 3C array:
- 4 or 8 GStreamer-E tools on cable
- Multi-channel anchoring system remote control
In addition to GStreamer-E the following items can be purchased:
- Reel for 12-channel GStreamer-E
- Reel for 24-channel GStreamer-E
- BGW or BGW light winch
- Energy source Jack with remote control JackPad
- Borehole sources of pressure P (Pulse) or shear SH-waves (SHock) and SV-waves (GeoSV)
- Borehole hydrophone array WellStreamer
- High-frequency seismographs Sigma 4+ or DAQlink 5
- Borehole inclinometer
-
-
-
-
-
-
-
-
-
|
Model
|
GStreamer
|
GStreamer-P
|
GStreamer-E
|
|
Number of levels
|
4 or 8
|
4 or 8
|
1, 4, or 8
|
|
Anchoring
|
spring system
|
pneumatic cylinder
|
geared motor
|
|
Well casing type
|
PVC
|
any or open hole
|
any or open hole
|
|
Number of components
|
3
|
3
|
3
|
|
Geophones natural frequency
|
12 Hz or 20 Hz (on request)
|
12 Hz or 4.5 / 20 Hz (on request)
|
|
Tool locking
|
remote triggering
|
simultaneous
|
individual
|
|
Clamping force
|
1:7 – 1:11
|
1:11 at 7 atm.
|
1:11
|
|
Maximum tool diameter
|
60 mm
|
58 mm
|
|
Well diameter range
|
70 - 150 mm
|
65 - 150 mm and more with anchor extenders
|
|
Maximum operating pressure
|
15 bar
|
>100 bar
|
