Views: 3201
Product code : 1489473243
Specifications: * material: cups and housing black lexan (polycarbonate), which is non-corrosive, u.v.-resistant and virtually shatterproof * bearings : modified teflon, self lubricating (no freezing or
Specifications:
* material: cups and housing black lexan (polycarbonate), which
is non-corrosive, u.v.-resistant and virtually shatterproof
* bearings : modified teflon, self lubricating (no freezing or
sticking), drum proof: O-ring mounted.
Easy to replace (within 5 years of operation)
* shaft : fully hardened beryllium copper
* dimensions : 3 conical cups cross section 5 cm,
19cm diameter of the rotor
* endurance test : at Washington Observatory (testreport available)
* maintenance : clean inside once a year in environments with a lot
of dust or sand
* heating: optional KAPTON isolated heating
* maximum windspeed: recorded up to 97 m/s, without damage of
the anemometer
* temperature range: - 50 to + 65 C (even without heating)
* humidity : 0 to 100 % R.H. (tropical resistant)
* electrical puls system: standard electromagnetic pulsgenerator,
optional: Hall generator, reed contact
* power consumption : standard zero
* calibration : according to measurements at the Eindhoven
University of Technology, The Dutch Meteorological Institute
(KNMI) and the National Aerospace Laboratory (NLR), The
Netherlands and MEASNET procedure
* calibration certificate: optional individual calibration
certificate available 0.1 m/s accuracy (MEASNET)
* distance constant: standard 2.9 meter
* effective dynamic start speed: appr 0.35 m/s (compensated in
windlogger EKO21B and wind transducer EKO2CN)
* stub mounting mast : standard: Aluminum: Plus version: steel
* cable length: specify required cable length standard no cable,
PLUS versions 2 meter inside soldered cable
* cable type : standard cable:2 wire cable, special cable: coax
RG 58CU or shielded twisted pair or 6 wire shielded cable type
P3MS for combination with wind vane and connection box
* connection box: optional connection box for easy connection of
cable close to the sensor
* bracket *): optional bracket available (single or combined with
vane)
* signal conditioning*) : optional EKO 22CN with two wire 4..20 mA
* read-out units *):
- Sirocco, moving coil meter, direct connection, selfpowered
- EKO 2FN-C3 (windrun/max speed/instantaneous speed/clock)
Hệ thống đo gió cho tầu biển
CUSTOMER INFORMATION
SHIPPING ADDRESS
PAYMENTS
Branch:
Account name:
Account number:
Hệ thống đo gió cho tầu biển
CUSTOMER INFORMATION
SHIPPING ADDRESS
PAYMENTS
